• Pallet truck accessible – no ramp, bump or obstruction – nothing to stumble over 
• Unique “Space Saving” design with the smallest footprint in the industry – patent pending
• Handles GMA pallets from the end
• Handles CHEP pallets from end or side
• Operator has full access to pallet sides and end for easy pallet loading or unloading -- nothing to reach over!
• Intelligent design and operator interface

                                                    - Pallet presence sensors

                                                 - Highly visible function lights at top of mast 

                                                     - Voice commands

                Mast Lights Red &         Operator Console          Pallet sensor to detect

                Green) to Indicate       mounted on back           pallet presence

                pallet presence and      of mast

                fault conditions

                   Linear motion            Independent pallet         Perimeter foot guard

                   structure with            stop at each side of        around rear of structure

                   telescopic forks          the carriage to  

                                        prevent impact

                                        damage

Specifications

Pallet raised Hgt. = 38"

Capacity = 2500 lbs @ 24" load center

Overall Width = 37"

Overall Depth = 40"

Fork length = 40” or 48”                           (operator selectable) 

Fork Lowered height = 3.6” – 4.6”      (operator selectctable) 

Overall fork width = 28” 

Individual Fork Width = 6.7"

Handles GMA pallets, CHEP pallets and skids 

115 volt AC power operation with push button hand control

Hydraulic lift & lower operation with inverted ram style cylinder 

Electro -mechanically driven, 2:1 ratio retractable fork

Pallet sensors and function lights at top of mast to help operator correctly position pallet 

Patented "foot clear" safety design

Perimeter foot guard around rear of structure

Independent pallet stop at each side of the carriage to prevent impact damage

Post and toe guard anchored to floor

 

 

 

 

 

 

Lift Pilot Spec. Sheet 

 

 

Call (800)950-6438 or E-mail terry@indoff-fl.com 

 

 for discounted pricing and information!

 

We also sell replacement parts for ALL Bishamon products. Call or e-mail for pricing

 

 

 

The Bishamon EZ OFF Lifter ^® pallet positioners are the ultimate ergonomic solution for loading or unloading pallets in applications when loads are transported with a pallet truck. These revolutionary products provide the answer for maintaining the load at a convenient working height. They also provide easy pallet rotation and near side loading to eliminate excessive lifting, bending, and stretching. They are electro-hydraulic operation and available in a free-standing front access model, and a bolt-down model with ramp access from three positions.

           

  Standard Features  

• Feet-clear safety circuit automatically stops the platform desent a 9 in above the floor preventing unintentional foot entrapment under the platform or pallet

• Platform Safety Cover guard pinch points around the mast

• Chain cover guards pich pints around the upper chain wheel

• Hydraulic power unit with unitized control valaves and reservoir

• 1 HP 115V electric motor

• 40.50 in. diameter rotating disk supported by 32 precision ball bearings

• Hinged integreated approach ramp

• Integrated lifting tabs and platform catches for transporting with a forkliftt

• Rear leveling feet

• Durable powder coated finish

• Pallet truck access from 3- sides (EZO-25E-S model only)

• One fixed ramp fits all three sides (EZO-25E-3S model only)

 • One pallet bumper / stop (EZO-25-3S model only)

           EZ OFF Spec Sheet                    EZ OFF Manual                       EZ OFF Parts List                             

Model EZO-25E Drawing      Model EZO-25E-3S Drawing               EZ Off Lifter      

                                                                                              Application Photo

Call (800)950-6438 or E-mail terry@indoff-fl.com 

 for discounted pricing and information! 

We also sell replacement parts for ALL Bishamon products. Call or e-mail for pricing

EZ-UP™ Series

• Pnuematic Lift Table with 1,700 lbs. Capacity
• Provide Lifting Power in Locations Where Electro-Hydraulic Operation is Not Viable Option
• Rotating Platforms Available for Improved Ergonomics

The Bishamon EZ-UP is the ideal lifting and work positioning solution whenever operator control is required and shop air is convenient. Incorporating many of the same advanced ergonomic features as the popular EZ Loader (captive air pallet positioners), the EZ-UP utilizes constant shop air, allowing the operator to position the load for loading or unloading. The integral rotator ring eliminates the need to reach, stretch or walk around the pallet, making the EZ-UP an unsurpassed ergonomic tool that helps increase productivity at your facility. Pneumatic lifts contain no electrical or hydraulic components, and require little maintenance. They provide the ideal tool where cleanliness is a must and where sparks can be hazardous. Lift tables in general position the work closer to the worker, which reduces the risk of injury, worker fatigue, or the chance of damage to sensitive products that are work in process. Typical applications are found in most any manufacturing, processing or distribution facility.   

EZU-15-R with optional Valve Stand

 Standard Features

• Firestone Airstroke Actuator raises and lowers the table platform to vertically position the load to the desired height

• Hand or foot control is standard

• Entrapped rollers on base and platform for added stability

• Hinged maintenance bars

• Rotating models feature a secured center pivot with ball bearing that provides smooth, even rotation

• High quality 3 position hand lever control allows easy operation

• Clean design with minimum of maintenance needed

• Easily relocated with a fork truck

• Heavy-duty structural steel construction with rugged base frame

• Durable and attractive polyester powder coating adds life and superior corrosion resistance to the finish

 EZ Up Drawings                   EZ Up Spec. Sheet

Call (800)950-6438 or E-mail terry@indoff-fl.com 

 for discounted pricing and information! 

We also sell replacement parts for ALL Bishamon products. Call or e-mail for pricing

  EZ Loader ^®

  Self-Leveling Positioner

• New Advanced Design Allows Capacity Adjustment Without Changing Air Pressure
• Captive Air System Eliminates Cumbersome Mechanical Springs
• Integral Turntable Top For Enhanced Ergonomics

  EZ Loader in Action

  EZ Loader vs Competitors Model

The new EZ Loader^® can now handle a wide range of weight capacities from 250 lbs up to 4,000 lbs..To make it even better, we added the EZ Adjust knob - a three position knob that allows adjustment of the collapsed capacity without changing the air pressure! EZ Loaders are designed to eliminate worker bending by automatically raising and lowering pallets during loading or unloading without the use of mechanical springs, motors or hydraulics.

EZ Loaders also allow easy pallet rotation for near-side loading so the worker does not have to reach or strain. As the load weight changes, the EZ Loader automatically adjusts, keeping the top of the load at a convenient working height. The patented pneumatic system found only on the EZ Loader has proven to be the choice of industry professionals worldwide.

 Standard Features

• Self-leveling design automatically keeps the top of the load at a convenient working height to help eliminate bending and improve productivity

• Integral rotator ring helps eliminate reaching and stretching

• Secured ball bearing center pivot of the 43" diameter rotator ring provides smooth, even rotation

• Pressure relief valve prevents excess pressure build-up

• Surfaces are phosphatized and powder coated with a high quality polyester for a lasting, durable finish

• Rollers are entrapped in the base frame and platform for added stability

 • A full coverage finger guard eliminates pinch points between the rotator underside of the rotataor rings and the bearings

 • Integral maintenance blocks

 • EZ Loaders arrive at your facility fully assembled - just add air!

 • Easily transported with a fork truck or via optional portability packages

28"x48" & 36"x48" Fixed Non-Rotating Top
  

                                                         

                         

     EZ Loader Cost                                  EZ Loader Product Applications

      System Analysis

Call (800)950-6438 or E-mail terry@indoff-fl.com 

 for discounted pricing and information! 

We also sell replacement parts for ALL Bishamon products. Call or e-mail for pricing